Trolmaster Hydro-X System Misc Controls [RJ12 | ECS | SPH-1]

 

RJ12 Extension Cable Set(ECS-1)

TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable.

  • Plug and Play

Inclusions:

1 x Male-to-Male 16ft RJ12 Cable

1 x Male-to-Male 4ft RJ12 Cable

1 x RJ12 T-Splitter

 

Trolmaster RJ12 Splitter Hub [SPH-1]

The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors. 

The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply. 

The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters.

  • LED indicator 
  • Plug & Play
     

Hydro-X Expander Station 4 [4RS-1]

The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy. 

* This plug is NOT U.L. or E.T.L listed.

 

Hydro-X Dual Condition Adaptor [DCC-1]

The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many other examples where two conditions can be either combined or split. 

The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2 and DSP-1). 

Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module. 

The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.

 

Hydro-X Rj12 To 3.5 Jack Convertor [ECS-2]

The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with a pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture / LED driver using the two-screw terminal block to connect to loose wires on the LED driver. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter.

  • 1 x 16 ft RJ12 Cable
  • 1 x 4 ft RJ12 to 3.5 Jack Cable
  • 1 x T-shaped Splitter
  • 1 x 3.5mm Female Barrel Connector

 

Hydro-X Rj12 - 3pin Ip67 Converter [ECS-3]

The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof  Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof  Connector cable.

  • 1 x 16 ft RJ12 Cable
  • 1 x 4 ft RJ12 to 3pin IP67 converter cable
  • 1 x T-shaped Splitter

 

Hydro-X Rj12 To M16 Pushlock [ECS-5]

The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.

  • 1 x 16 ft RJ12 Cable
  • 1 x 4 ft RJ12 to PushLock Waterproof Connector converter cable
  • 1 x T-shaped Splitter

(SKU: 131399)

Shipping Calculator

Enter the quantity of product and your suburb name to calculate shipping costs.


This calculator will show you the delivery charges for this product only.



Free Shipping Eligibility


Aqua Gardening offers free shipping on most orders above $249 that are not bulky items.  Once you place all the items you wish to buy in the cart, the combined shipping price will be shown in the cart, including Free Shipping if you are eligible. For full details please see our free shipping eligibility here.



Delivery Information


Back Order products

These are products we usually carry in stock but are temporary out of stock. These products will be back in stock within a few days. We can send you an email notification when they are back in stock if you click on the “Notify me when back in stock” link. See the full details here.


Special Order products

These are products that we do not regularly stock. These products will be ordered specially for you, or dispatched directly to you from our supplier. See the full details here.


Online Only products

These are products that are in stock in a different warehouse and can’t be picked up with the Click & Collect option. If you wish to collect these products from our Brisbane showroom, you can enter our address as the delivery address. Shipping costs may apply. See the full details here.


Click & Collect Only products

These products can only be collected from our Brisbane showroom as we can not ship them. If you place any of these products in your cart, you will only see the Click & Collect option at the checkout.


Fast Dispatch products

These are products that we have in stock in our Brisbane showroom, and they are available for immediate Click & Collect or Shipping. Keep in mind that if you have a product which is not listed as a Fast Dispatch product in your cart, there might be a delay on your order. See the full details here.



Warranty


1 Year (Replacement Warranty - Store warranty, this product needs to be returned to Aqua Gardening for testing and replacement. )

Returns


60 Day Returns - We will provide a refund, exchange or store credit where you have decided you no longer want the product and it is in new, unopened condition. More details.